DC electric motors
M63x25-H

Dc electric motors diameter 63 m63x25 with encoder m63x25-h

M63x25-H

Stall torque from 2,95Nm to 1,05Nm

The M63x25-H motors are electric motors equipped with filter and circuit with one or two Hall sensors.

The Hall sensor provides a signal which allows to count the number of rotations of the motor. With two Hall sensors it is also possible to determine the sense of rotation of the electric motor. Thanks to the filter, which is normally made of an LC-circuit, electric motors can be tested in compliance with the EMC directive.

In the technical datasheet it is possible to select the motor shaft, the circuit with one or two Hall sensors and to request special cables which have to be indicate in the enquiry form.

In the table named “Electrical Data” it is indicate the voltage range of the M63-H motors’ applications and a list of the performances for the most commonly used voltage values, 12V ad 24V.

The interactive curve allows to select the required performances by selecting power voltage and no-load speed.

 

Applications

The M63x25-H electric motors are generally applied in linear actuators and in various automatisms.

Electric data

12 V 24 V
Standard nominal voltage 12 V 24 V
No load speed
N0 [Rpm]
7000÷2500 7000÷2500
No load current
I0 [A]
2.30÷0.80 2.30÷0.80
Nominal speed
Nn [Rpm]
6848÷2349 6848÷2349
Nominal torque
Mn [Nm]
0.06 0.06
Nominal current
In [A]
5.90÷2.10 2.95÷1.05
Nominal power
Pn [W]
45.90÷15.70 37.80÷12.20
Stall torque
Ms [Nm]
2.95÷1.05 2.95÷1.05
Starting current
Is [A]
171÷22 85.50÷11
Max power
Pmax [W]
542÷69 542÷69
Max efficiency
ηmax [%]
84÷69 84÷69

Mechanical data

Type of duty S1
Weight 1.10

Technical drawing

Dc electric motors diameter 63 m63x25 with encoder m63x25-h

Configure motor

1Shaft


2Filter


3 Encoder


4 Set the characteristic curve

Select the default values or configure the curve as you desire

No-load RPM motor: Range: 7000÷2500
Power voltage: Range: 0-42 V

Characteristic curve

Torque constant: Internal resistance:
Find out how to read the characteristic curves.

Ask for a quotation for this motor

Selected configuration:


  • Shaft: Not selected
  • Filter: Not selected
  • Hall sensor: Not selected
  • Characteristic curve: Not selected

Your data:


N.B. Please remember that we can’t sell to privates and we don’t provide replacement motors.

Fields marked with * are mandatory