Planetary gear motors
M63x55-H_PM62LN

Planetary gear motors diameter 63_p_62 m63x55-h_pm62ln

M63x55-H_PM62LN

Stall torque from 2404,0Nm to 4,20Nm

The M63x55-H electric motors are equipped with filter and one or two Hall sensors. The PM62LN planetary gearboxes have both toothed wheels and housing made of metal.

The Hall sensors supply a signal which allows to count the number of rotations made by the motor. With two Hall sensor it is possible to determine also the rotation direction of the electric motor.

The noise-suppression filter, generally made of an LC-circuit, allows the electric motors to be tested in compliance with the EMC norms.

In the technical data-sheet it is possible to select the circuit with one or two Hall sensors and to request a particular set of cables or a special output gear shaft, different from the represented standard, by indicating them in the requirements form.

In the “Electric Data” table is indicated the range of working voltages of M63-H_PM62LN planetary gear motors and are listed the performances for the most commonly used voltages, 12V and 24V.

The interactive curve allows to choose the required performances by selecting the power voltage, no-load speed and the gear ratio at one, two or three stages.

Applications

The M63x55-H_PM62LN planetary gear motors are used in linear actuators and in automatisms of various kind.

Stages' data

1 stage 2 stages 3 stages
Perm. output torque 8 Nm 25 Nm 50 Nm
Reduction ratios range 4:1÷13:1 14:1÷89:1 50:1÷601:1
Max. backlash (in °DEG) 0.65 0.70 0.75
Operating temperature -30°C to 120°C -30°C to 120°C -30°C to 120°C
Max. load, radial (Mid output shaft) 240 N 360 N 520 N
Max. load, axial 70 N 100 N 150 N
Max. perm. fitting pressure 1000 N 1000 N 1000 N
Gear drive length 73.20±0.50 90.10±0.50 106.90±0.50
Weight (approx.) 0.80 Kg 1.20 Kg 1.60 Kg
Electric data
Nominal voltage range 0-42 V 0-42 V 0-42 V
Standard nominal voltage 12 V 24 V 12 V 24 V 12 V 24 V
No load speed
N0 [Rpm]
1750÷192 1750÷192 500÷28.10 500÷28.10 140÷4.16 140÷4.16
No load current
I0 [A]
1.43÷0.51 0.72÷0.26 1.43÷0.51 0.72÷0.26 1.43÷0.51 0.72÷0.26
Nominal speed
Nn [Rpm]
1718.30÷182.50 1702.30÷177.60 490.90÷28.10 486.40÷25.90 137.50÷3.95 136.20÷3.84
Nominal torque
Mn [Nm]
0.32÷1.04 0.48÷1.56 1.12÷7.12 1.68÷10.70 4÷48.10 6÷72.10
Nominal current
In [A]
6.14÷2.20 4.25÷1.52 6.14÷2.20 4.25÷1.52 6.14÷2.20 4.25÷1.52
Nominal power
Pn [W]
57.60÷19.90 85.50÷29 57.60÷19.90 85.50÷29 57.60÷19.90 85.50÷29
Stall torque
Ms [Nm]
55.90÷6 55.90÷6 382.70÷21 382.70÷21 2584.30÷75 2584.30÷75
Starting current
Is [A]
255÷33 127.50÷16.50 255÷33 127.50÷16.50 255÷33 127.50÷16.50
Max power
Pmax [W]
800÷103 800÷103 800÷103 800÷103 800÷103 800÷103
Max efficiency
ηmax [%]
89÷81 89÷81 89÷81 89÷81 89÷81 89÷81

Mechanical data

Type of duty S1
Motor weight 1.10

Technical drawing

Planetary gear motors diameter 63_p_62 m63x55-h_pm62ln

Configure motor

1 Gear shaft


2Filter


3 Encoder


4 Set the characteristic curve

Select the default values or configure the curve as you desire

No-load RPM motor: Range: 7000÷2500
Power voltage: Range: 0-42 V
Gear ratio

Characteristic curve

Torque constant: Internal resistance:
Find out how to read the characteristic curves.

Ask for a quotation for this motor

Selected configuration:


  • Gear shaft: Not selected
  • Filter: Not selected
  • Hall sensor: Not selected
  • Characteristic curve: Not selected

Your data:


N.B. Please remember that we can’t sell to privates and we don’t provide replacement motors.

Fields marked with * are mandatory